Importadora Biodinámica SpA · Scientific equipmentSantiago, Chile · biodynex.clEspañol
BiodynexRequest a quote
JOANLAB pipette stand · MPS series — 3-9 pipettes, Linear or circularCircular stand loaded with six micropipettes of different volumesBenchtop stand with three micropipettes hangingEmpty circular stand, showing its radial slots
Pipetting and dispensing · Stands

JOANLAB pipette stand · MPS series

Micropipette stands in a three-position linear version and six- and nine-position circular versions; the round models carry an iron counterweight and rotate 360°.

  • MPS-3 linear, 3 positions
  • MPS-6 and MPS-9 circular, 6 and 9 positions
  • Iron counterweight of about 290 g (MPS-6 and MPS-9)
  • 360° rotation on the circular models
Configurations, certifications, power supply, accessories and availability are confirmed in the quote.
Specifications

Summary datasheet

Positions3 (MPS-3), 6 (MPS-6) and 9 (MPS-9)
FormatLinear (MPS-3); circular (MPS-6 and MPS-9)
Height225 mm (MPS-3); 310 mm (MPS-6 and MPS-9)
Net weight150 g (MPS-3), 600 g (MPS-6) and 650 g (MPS-9)
Base150 × 90 mm (MPS-3); Ø170 mm on the round models (MPS-6 and MPS-9), according to the manufacturer
CompatibilityManual pipettes with a finger hook, single-channel and multichannel. The manufacturer states compatibility with Gilson, Eppendorf, Thermo Scientific and BRAND, and with all multichannel pipettes. Pipettes without a finger hook, pipettes with special shapes, electronic pipettes and pipettes with a display screen are not applicable
Pipette diameterUp to 28 mm, the same limit on the linear MPS-3 and on the round models: it is the figure for checking whether a pipette fits. The 26 mm the manufacturer also states is the nominal size of the slot, not the ceiling
MaterialABS plastic. The round models (MPS-6 and MPS-9) carry an iron counterweight of about 290 g; the linear MPS-3 has no counterweight
AvailabilityImport to order / to be confirmed

Linear for three, or round for six and nine

The MPS-3 is linear, three positions, 150 × 90 × 225 mm; the round ones rotate 360° and share a Ø170 mm round base, so going from six to nine positions costs no bench space and adds only 50 g of weight: 600 g for the six and 650 g for the nine, against 150 g for the linear one.

All three are ABS plastic and take manual pipettes with a finger hook, single-channel and multichannel, up to 28 mm in diameter; electronic pipettes, pipettes with a display screen and special-shaped pipettes are out.

Built so the pipette never touches the bench

The positions are recessed so the instrument does not slide, and the pipette hangs by its finger hook with the cone in the air: neither cone nor tip rests on a surface. The manufacturer warns that a pipette without a finger hook is not held properly.